Forklift Battery Safe Installation and Charging
Batteries utilized in forklifts are costly pieces of equipment which are fairly large weighing in the thousands of pounds. The job of charging and installation of these batteries is something which should be planned out ahead of time in order to make certain that these methods could be completed correctly and safely. Maintaining proper handling and a sound charging procedure can really increase the regular lifespan of a battery.
Standard Charging
It is important not to connect the battery to the charger until it is at 20 percent capacity or less. By charging the battery when it is higher than 20%, the battery's lifespan could really be shortened. On roughly every 5th charge cycle, the charger must be set on the weekend or equalize setting, depending on which kind of charger you are utilizing.
The cycle of charging must not get interrupted. You must avoid using the battery for several hours when the charge cycle is complete. By practicing these methods, you could help make sure that you get the maximum battery performance available.
Charger Maintenance
Be certain to have the charger turned off when in the process of hooking up the battery to the charger. Connect the charger to the battery and not the forklift. This is a common mistake which could accidentally cause damage to both the forklift and the charger. It is also very vital that the battery amperage must match that of the charger.
The battery must never be allowed to completely discharge or deep discharge. This would ultimately shorten the lift of the battery and may even prevent the charger from being able to start. If the battery charger reads that there is no battery activity, it would not start the charge cycle. If this situation occurs, a technician will need to be called in order to re-set the charger prior to charge being able to begin.