Change a Propane Tank
Propane fueled forklifts are frequently used inside warehouses. The forklift is made with the propane tank mounted behind the operator. The tanks, that look a lot like beer kegs, have to be replaced every so often as they have a limited lifespan. Forklift operators should use care when handling propane tanks. Compressed gases are dangerous, specially because the gas is flammable. Utilize caution when replacing and removing propane tank to avoid being injured.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn off the tank valve. The lift truck should be left on until the engine dies. This process burns off the gas inside the transfer hose that connects the engine and the tank. Prior to taking the second steps, wear the correct safety equipment, such as insulated gloves made of either leather or neoprene. It is vital for you to protect your skin from touching the compressed gas, which is extremely cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reconnect the holding straps and to reconnect the hose at the valve of the tank.
3 You can inspect for leaks by applying soapy water to the valve and opening it slightly. Leaking gas would cause bubbles to froth around the value. If this occurs, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the area of the valve, and afterward perform the leak checking procedure over again. Persistent leaks mean that both the nut and connecting hose would need to be replaced. Then again, if replacing the nut and hose still does not stop the leak, the tank must be replaced.
4 Finally, open the valve all the way to enable the gas to fill the connecting hose. Afterward you could start the lift truck and resume working.