Forklifts are vehicles usually found inside warehouses, factories and other work sites where it is necessary to move heavy materials from one location to another. The mast is the mechanism situated on the front of the forklift that hydraulically lifts and lowers the load. The "cat" is the protected area where the forklift driver sits.
Forklifts are capable of lifting loads between one and five tons in weight. Various types could be utilized to lift shipping containers and loads that are much heavier.
Forklift tires must be maintained and checked on a regular basis. The types of tires on various forklifts vary according to factors like for instance frequency of use, weight of the loads and ground surfaces. Each and every forklift driver should have access to tire press, replacement tires and a forklift jack.
Tire Maintenance Instructions
You must frequently inspect the tires. Watch for indications of damage and wear to the tires. If the wear on the tire exceeds 40 percent, it needs to be replaced.
When purchasing tires, make sure that you are buying the right type - solid, pneumatic or polyurethane.
When the tire needs replacing, position the forklift jack under the tire and lift the forklift high enough that you could change the tires easily.
To remove the damaged tire, pull the tire from the rim using the tire press. Install the new tire and secure it well. If you are changing more than one tire and you have only one jack, lower the forklift, and after that reposition the jack at the next tire.
On-site tire repair could be performed by a repair company. If the tire is too big for both mobile and in-house tire presses, the tire that is damaged must be transported to a shop which has a stationary tire press.